Building Block House Setup & Maintenance: Ultimate DIY Guide

The requirements of the room space for the building block house are relatively large. Specifically, the building block house needs enough space to accommodate its structure and decoration, while also considering the space for daily activities. The following are the detailed space requirements:

1. Space size: Make sure there is enough space in the room to accommodate the building block house to avoid affecting daily activities. Generally speaking, each child should have a space of about 1.5 square meters, one adjacent wall, and at least two of the other three sides open so that the space can be expanded as the game needs.

2. Ventilation and lighting: The ventilation and lighting conditions in the room should be good to ensure air circulation in the building block house and avoid moisture and mold growth.

3. Decoration style: The design of the building block house should be coordinated with the overall decoration style of the room to achieve a beautiful effect.

In addition, the size and type of the building block house will also affect its demand for space. For example, some large building block houses may require a larger space for display and storage. Therefore, when choosing a building block house, the actual space size and layout of the room should be considered to ensure that the building block house can be accommodated and displayed without affecting daily use.

Maintenance and care：

‌1. Regular cleaning‌:

‌Disassembly and cleaning‌: Disassemble the building blocks and clean the surface of the building blocks with warm water and a soft brush. Avoid using a hard brush to avoid scratching the surface. After cleaning, let the building blocks dry before reassembling.

‌Use neutral cleaning fluid‌: For Lego building blocks, you can use a neutral cleaning fluid and clean water in a ratio of 2:8. After soaking for 10 minutes, use a soft brush to remove stubborn stains, then rinse with clean water and dry.

‌2. Avoid moisture and direct sunlight‌:

‌Dry in a cool place‌: Avoid exposure to the sun after cleaning, and choose a cool place to dry to prevent the building blocks from discoloring or deforming.

‌Moisture-proof and mildew-proof‌: Wooden building blocks should be kept away from moisture. After playing, they should be placed in a ventilated place to dry to prevent mold.

3. Storage management:

‌Use storage boxes: You can use Lego storage boxes or large boxes to store building blocks to avoid dust accumulation.

‌Storage in display cabinets: If conditions permit, you can use display cabinets to store building blocks to maintain their display effect and prevent dust.

‌4. Maintenance of special parts:

‌Metal contact points: Devices with metal contact points cannot be exposed to water. They can be wiped with a small amount of alcohol to prevent rust.

‌Tires and other parts: Tires and other parts need to be cleaned separately to prevent water accumulation and difficulty in drying.